DarwinFPV 2807 1300KV Brushless Motor for 7-Inch FPV Drone, 24V 1046.4W, 19x19mm M3 Mount

Overview

The DarwinFPV 2807 1300KV brushless motor is designed for 7-inch FPV drones that need long endurance and higher load capability. Each motor weighs 55.7 g (including wires) and is rated for up to 2.8 kg maximum thrust; with a GEMFAN 7040 prop at 24 V, measured thrust reaches 2866 g at 100% throttle. Optimized tuning maintains high torque at low speeds, with hovering current stated as 5% lower than motors of the same level for longer level-flight time.

Key Features

• 7075 aviation aluminum material for higher strength.
• Japan-imported bearings for smooth and quiet operation.
• High-performance, high-temperature-resistant arc-shaped magnets (N52H).
• Reinforced shaft structure using a copper sleeve and countersunk head gasket.

Specifications

Thrust Test Data (GEMFAN 7040, 24 V)

Whats Included

• 1 x 2807 motor
• 5 x M3*10 hexagon socket screws
• 1 x sticker

Applications

• 7-inch FPV drones focused on long endurance and larger load
• CineLifter X8 cinematic FPV drone builds
• 67 inch long-range FPV drone builds
• 5 inch whoop FPV drone builds

For build compatibility questions (props, ESC pairing, or frame mounting), contact [email protected] or visit https://rcdrone.top/.

Details

Built with a 7075 aviation aluminum bell for higher strength on 7-inch long-range and heavy-load FPV builds.

A reinforced shaft design combines a copper sleeve and countersunk head gasket for added durability in high-load setups.

Key specifications at a glance: 2807 stator size, 1300KV rating, 24V, 12N14P, and 1919mm M3 mounting.

24V thrust test results with GEMFAN 7040 props, reaching up to 2866g thrust at 100% throttle.