Overview

Address: California, United States (US)
Shop Hours: 6:00 - 22:00
Email: <a href="/cdn-cgi/l/email-protection#90e3f5e2e6f5e2d0e6f1fce6f5f2fffce4fee5e4bef3fffd" style="word-break: break-all;"> <span class="__cf_email__" data-cfemail="6c1f091e1a091e2c1a0d001a090e030018021918420f0301">[email&#160;protected]

The iFlight iPower GM110-8 is a brushless direct-drive gimbal motor with encoder, designed for camera stabilization using BLDC direct drive motors. A gimbal based on BLDC motors operates similarly to a regular gimbal based on a hobby servo, with direct-drive control for stabilization.

For compatibility questions (controller, wiring, integration) or bulk inquiries, contact [email protected] or visit https://rcdrone.top/.

Key Features

Sealed case to help prevent contamination by dust and dirt
Hollow shaft for slip ring integration (OD/ID not specified)
Motor configuration: 24N/28P (torque-focused design)

Specifications

Model	GM110-8
Motor outer diameter	110 0.05 mm
Configuration	24N/28P
Motor height	33.9 0.2 mm (included with encoder housing)
Hollow shaft (OD)	N/A
Hollow shaft (ID)	N/A
Wire length	610 3 mm
Cable AWG	#24
Motor weight	610 3 g
Wire plug	2.5 mm Dupont connector
No-load current	0.09 0.1 A
No-load voltage	20 V
No-load RPM	125~139 RPM
Load current	2 A
Load voltage	20 V
Load torque	8000-12000 gcm
Motor internal resistance	20.19 ohm 5% (resistance varies with temperature)
High voltage test	DC 500 V, 1 mA @ 2 sec
Rotor housing runout	<= 0.1 mm
Steering (axle extension)	Clockwise
High temperature test	Keep at 60C for 100 hours; motor can work normally after 24 hours at room temperature
Low temperature test	Keep at -20C for 100 hours; motor can work normally after 24 hours at room temperature
Maximum power	<= 60 W
Working current	4-6S
Working temperature / humidity	-20~60C; 10~90% RH