Timney Triggers Remington 700 HIT Trigger

Description

Timneys engineers took a look at the M700 triggers and came up with a design that features new geometry, the Remington 700 HIT Trigger is robust and features Timneys new Sear Engagement Adjustment Lock design (SEAL’d). This ensures a user-friendly experience, is adjustable for pull weight and overtravel, yet is delicate enough to be set with a pull weight as low as 8 oz up to 2 lbs.Every part of the HIT Trigger is machined using state-of-the-art technology, there was no skimping with metal injection molding or stamping, old-school parts. The triggers sear and trigger shoe are precision-machined, heat treated to 56 Rockwell with a black oxide trigger coating and an NP-3 plated sear for maximum lubricity and a lifetime of reliable performance.The Hit is backed by the legendary Timney No Hassle, Lifetime Warranty.

Trigger Adjustment Tips

Overtravel
Make sure the weapon is clear and dry fire the trigger, while it is in the fired position tighten the over-travel screw in until it hits the trigger and then back it out about 1/6 of a turn or one flat of the hex wrench. It should move freely and fire easily, but you shouldnt have to chase the trigger more than about .015

Pull Weight adjustment
The bottom front screw adjusts the pull weight. Turning this screw clockwise will increase the pull weight. Turning it counterclockwise will decrease the pull weight. If you only have digital clocks, just remember righty tighty, lefty loosey. Do not reduce pull weight below 1.5 lbs (or 8oz for Calvin Elite Series.)

Specs