Overview

Address: 351 40th St, Oakland, California, 94609, United States (US)
Shop Hours: 6:00 - 22:00
Email: <a href="/cdn-cgi/l/email-protection#720117000417003204131e0417101d1e061c07065c111d1f" style="word-break: break-all;"> <span class="__cf_email__" data-cfemail="502335222635221026313c2635323f3c243e25247e333f3d">[email&#160;protected]

The iFlight GM8112-80T gimbal motor with encoder is a brushless direct-drive gimbal motor intended for large cameras (Red Epic / DSLR class) and multi-rotor lift platforms. It uses an included AS5048A encoder (aluminum case) for position feedback in gimbal stabilization systems.

Key Features

Brushless gimbal motor design for direct-drive camera stabilization
Hollow-shaft construction (specified OD/ID tolerances below)
Includes AS5048A encoder with aluminum case
Clockwise steering (axle extension direction)

Specifications

Model	GM8112
Motor outer diameter	89.50.05 mm
Configuration	36N/42P
Motor height	33.40.2 mm (included with encoder housing)
Hollow shaft OD	25 -0.008/-0.012 mm
Hollow shaft ID	22 +0.05/+0.1 mm
Wire length	6103 mm
Cable AWG	#24
Motor weight	4461 g
Wire plug	2.5 mm Dupont connector
No-load current	0.30.1 A
No-load voltage	22 V
No-load RPM	380~420 RPM
Load current	2 A
Load voltage	20 V
Load torque	6000-9000 gcm
Motor internal resistance	4.2 5% (resistance varies with temperature)
High voltage test	DC500V 1mA @ 2 sec
Rotor housing runout	0.1 mm
Steering (axle extension)	Clockwise
High temperature test	Keep at 60C for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature test	Keep at -20C for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power	80 W
Working current	3-5S
Working temperature / humidity	-20~60C; 10~90% RH