Hobbywing XeRun XR8 PRO G3 Combo

1/8, 1/10th1/8 Off-road,On-road Racing
1/10 Short course truck,Monster truck

What is inside the combo?

• (1) XeRun XR8 PRO G3 ESC
• (1) XeRun SD brushless motor of your choice

XeRun XR8 Pro G3 ESC

Bottomline:

• The product features three common profiles that are suitable for all 1/8 Racing applications, allowing users to select and use them instantly. These profiles include Zero timing-Blinky mode, 1/8 Off-Road Racing mode, and 1/8 On-Road Racing mode.
• XR8 PRO G3 ESC offers 32 built-in adjustable parameters, providing flexibility to meet various power requirements. These parameters can be easily imported and exported, facilitating communication and learning among drivers.
• The ESC supports firmware upgrades, which can be done using the multi-function LCD G2 programming box, OTA Programmer, or Tunalyzer (available for purchase). This allows users to enjoy the latest functions and enhancements.
• With the built-in switch mode BEC, the ESC provides a maximum output of 12A and allows adjustable voltage options of 6V or 7.4V. This flexibility is ideal for usage with servos and other devices that require different voltage levels.
• The ESC includes a built-in reverse connection protection circuit, ensuring the ESC is protected from damage in case of reverse connection.
• The ESC features a data logging function, allowing users to view various running data through the HW LINK app using the OTA Bluetooth module. This provides valuable insights and analysis for performance evaluation.

Spec & Technical data:

The Hobbywing XeRun XR8 PRO G3 Combo includes a sensored/sensorless brushless motor with peak current ratings of 200A (continuous) and 1080A (short-term). This motor is suitable for various applications, including 1/8 off-road, on-road racing, and 1/10 short course trucks. With a KV rating of 4000 and a 3660 size, this motor can be powered by up to 4S lithium-ion batteries. The ESC features a BEC output that is adjustable between 6V and 7.4V, with continuous current handling up to 6A (switch-mode).

XeRun 3660SD G2 Motor

Bottomline

Xerun 3660sensored brushless motor

Motor Dimension:=36mm (1.417in) L=62(2.44in)

IMPORTANT NOTE:
The Maximum Output Power is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the maximum input power nor the rating power, it is calculated by RPM x Torque / 9550. Because each factory runs a different testing platform, the above data may vary. Max Amp is the Current at MaxOutput Power It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, overloaded.) The KV is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.

• 1/8 mini competition
• 1/10 2WD/4WD short course truck
• 1/10 Truggy/ Monster Pro Race
• Best match withXR8 SCT Pro ESC

Manufacturer limited warranty Information

• Never leave this product unsupervised when it is powered on.
• Ensure all wires and connections are well insulated before connecting the motor to related devices, as short circuit will damage your motor.
• Please strictly follow the A-A, B-B and C-C wiring order when connecting an ESC to the motor. Never allow this product to come in contact with water, oil, fuel or other electroconductive liquids. If this happens, stop the use of your product immediately and let it dry carefully.
• Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.
• Never hit full throttle before installing the pinion, as high-speed rotation may cause damage to the motor in circumstances of no load.
• Ensure all devices are well connected, in order to prevent poor connection that may cause your vehicle to lose control or other unpredictable issues such as damage to the device.
• Stop using the motor when its shell temperature exceeds 100/212; otherwise, the rotor may be demagnetized and cause irreversible damage to your motor.

Xerun4268 SD G3 Motor

ROAR Approved

• Suitable for1/8th SCT, Buggy and Touring Car
• Turbo Timing Technology
• Full Sensored mode (when paired with XR8 Plus G2S ESC)
• Adjustable Timing (Bi-Directional) 20-40 degrees
• Advanced Hall Sensor System
• 4-pole-8-magnet “Staggered Pole” rotor – HOBBYWING Patented design
• Guarantees users the effective heat dissipation and dust prevention
• The use of double insulated windings (240C R-rated), NMB bearings from Japan, and the high-intensity adhesive (340C) guarantees users the outstanding performance and super durability.

Specification