OddityRC Spinnybois 1405 Motor 3200KV (6S) / 4800KV (4S) – 14x5mm 9N12P Brushless

Overview

OddityRC Spinnybois 1405 motor is available in two KV options (3200KV and 4800KV) and is built around a 14mm x 5mm stator (9N12P). The design highlights include an optimized magnetic circuit for powerful, linear throttle response and a rotor structure intended for efficient heat dissipation during high-intensity flight.

Selectable Options

• KV: 3200KV 6S
• KV: 4800KV 4S

Key Features

• Optimized magnetic circuit design for excellent efficiency and power
• Industrial rotor design for efficient heat dissipation
• Aviation grade aluminum rotor case
• Aviation grade aluminum alloy base
• SUS420F shaft
• NMB bearing
• N55H arc magnet / Sintered NdFeB 55H magnet
• 0.2mm ultra thin silicon steel iron core
• Class C, 220C enameled wire (220C high temperature resistance enameled wire)

Specifications

General (1405)

1405-3200KV

1405-4800KV

Product Drawing (1405)

Load Performance (Test Samples Only)

1405-3200KV (Model: P 1405 3200KV; Propeller: CF D63-3B; Voltage: 24.0V)

1405-4800KV (Model: P 1405 4800KV; Propeller: CF D63-3B; Voltage: 16.0V)

For product questions or setup support, contact https:/// or email support@.

Details

Choose between 3200KV and 4800KV to match your 4S or 6S setup and preferred prop load.

An optimized magnetic circuit is designed for efficient power delivery and smooth, linear throttle feel.

Material choices focus on durability and efficiency, from the aluminum rotor and base to the SUS420F shaft and NMB bearing.

The industrial-style rotor structure is built to shed heat effectively during high-intensity flight.

A rigid aluminum alloy case and anti-loosening structure help the motor hold up to hard use and impacts.

Core construction details include a 0.2mm iron core and 520ZZ bearing, with a listed weight of 12.5g.

Mounting and sizing details are provided for frame fitment, including the 4M2 mounting pattern.

Both KV options share the same 1405 form factor and feature the same open rotor styling for airflow.

Lead length is marked at 105mm, and the sample weight displayed on the scale reads 12.2g.

A sample 1405-3200KV motor is shown on a scale with a displayed weight of 12.5g.

Full 1405-3200KV electrical and mechanical specs are listed for build planning and ESC selection.

The 1405-4800KV spec table includes rated voltage and recommended ESC current for 4S setups.

Test-sample load data is provided for 1405-3200KV to compare thrust, current draw, and efficiency by throttle.

Details

The OddityRC Spinnybois 1405 motor uses an aluminum alloy case and SUS420F stainless steel components with an anti-loosening structure.

The OddityRC Spinnybois 1405 motor uses a SUS420F shaft, 520ZZ bearings, and a 12.5g build with NdFeB 55H magnets.

OddityRC Spinnybois 1405 motor uses a 4M2 mounting pattern and is labeled 3200KV on the can.

The OddityRC Spinnybois 1405 motor features a compact bell design with a red top plate and pre-attached lead wires for easy installs.

OddityRC Spinnybois 1405 motors are labeled with KV options like 4800KV and include pre-soldered leads measuring about 105mm.

The OddityRC Spinnybois 1405-3200KV motor weighs in at about 12.5 g on a digital scale for lightweight builds.

OddityRC Spinnybois 1405-3200KV motor specs list a 14mm x 5mm stator, 1.5mm shaft, 24AWG 100mm lead wires, and a 6S rated voltage.

OddityRC Spinnybois 1405-4800KV motor specs list 14mm stator diameter, 0.80A no-load current, 19.98A max current, and 16.8V (4S) rated voltage.

OddityRC Spinnybois 1405-3200KV load testing at 24.0V with a CF D63-3B prop lists throttle-based current draw, thrust (g), efficiency (g/W), and input power.

The 1405 4800KV motor load data at 16V with a CF D63-3B prop lists throttle, current draw, thrust, efficiency, input power, and RPM for tuning.