Overview

The iFlight GM8112-80T Encoder Combo Set is a gimbal encoder combo set designed for brushless 3-axis gimbal stabilizers. Encoders are sensors added to each brushless gimbal motor to track motor position more accurately, improving stabilization performance and helping increase battery efficiency.

In a brushless gimbal control system, stabilization combines passive inertial stabilization (requiring good camera balance across Pan/Tilt/Roll axes) and active stabilization, where sensors measure axis motion and motors counteract that motion in real time.

Key Features

Easy gimbal tuning with reduced calibration work
Power saving; 5x longer working time than a gimbal without an encoder system
Twin IMUs
Faster response with instant motor torque increase; improved handling at difficult rotation angles
Encoder chip: A5048a (AS5048A)

Specifications

Model	GM8112
Motor outer diameter	89.5 0.05 mm
Configuration	36N/42P
Motor height	33.4 0.2 mm (included with encoder housing)
Hollow shaft (OD)	25 -0.008/-0.012 mm
Hollow shaft (ID)	22 +0.05/+0.1 mm
Wire length	610 3 mm
Cable AWG	#24
Motor weight	446 1 g
Wire plug	2.5 mm dupont connector
No-load current	0.3 0.1 A
No-load voltage	22 V
No-load RPM	380~420 RPM
Load current	2 A
Load voltage	20 V
Load torque (g)	6000-9000
Motor internal resistance	4.2 ohm 5% (resistance varies with temperature)
High voltage test	DC500V 1mA @2sec
Rotor housing runout	<= 0.1 mm
Steering (axle extension)	Clockwise
High temperature test	60C for 100 hours; motor works normally after 24 hours at room temperature
Low temperature test	-20C for 100 hours; motor works normally after 24 hours at room temperature
Maximum power	<= 80 W
Working current	3-5S
Working temperature / humidity	-20~60C; 10~90%RH

Whats Included

3 x GM8112 gimbal motor with AS5048A encoder & magnet
1 x Alexmos 32BIT BGC board (encoder version, without aluminum case)
1 x Connecting cables set

For compatibility questions or setup help, contact [email protected] or visit https://rcdrone.top/.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products

1504 2800KV Brushless Motor Power System with XP-7A ESC, GWS6030 Prop for 2S RC Airplane Indoor Flight 154g Thrust

Sale

Shopping Cart

Menu

iFlight GM8112-80T Encoder Combo Set: 3x GM8112 Gimbal Motors (AS5048A) + Alexmos 32BIT BGC