Overview

The T-Motor VL1380 KV60 is a VTOL UAV motor designed for high-load compound-wing platforms. Recommended system voltage is 24S, with a recommended MTOW (Quad) of 140~150kg and a max thrust/arm of 83kg.

Key Features

VL series propulsion system pairing: VL1380 KV60 motor + VL300A ESC + VZ45 propeller.
Fast and economical propeller locking: 360 custom angle propeller-locking; ESC adjusts current to control torque for adaptive locking.
Propeller-locking power consumption: approximately 10W.
IP45 statement in product materials: dust-proof mesh and optimized motor structure stated to elevate protection rating to IP45.
Temperature feedback & real-time monitoring: for stable, controllable operation under high load.

For compatibility checks (24S power system, PWM/CAN integration, propeller selection) and order support, contact https://rcdrone.top/ or email [email protected].

Specifications

Motor (VL1380 KV60)

Model No.	VL1380 KV60	Magnet Level	180C
Motor Size	149.6*63.8mm	Lead Cable	Enameled Wire 150mm
Stator	150C High Temperature-Resisting Coatings	Copper Wire	200C
Configuration	36N42P	Coil Insulation Test	1000V/5s
Shaft Diameter	IN: 20	Rotor Dynamic Balance Standard	20mg
Bearing	Imported 6904	IP	IPX5
Centrifugal Cooling Design	YES	Package Size	28217280mm

Motor Performance

Model No.	VL1380	KV (RPM/V)	60
Rated Voltage (LiPo)	24S	Idle Current (15V)	4.8A
Internal Resistance (25C)	13m	Peak Current	230A
Continuous Power (180s)	4500W	Ambient Temperature	-30~55C
Max Thrust	83kg	Motor Weight (Incl. Cable)	2400g

ESC Specs (VL300A 24S)

Model No.	VL300A 24S	Control	PWM/CAN
Max Voltage	108V	Protocol	CAN
Peak Current (10s)	300A (Open Environment And Temperature60C)	Propeller-Locking	ElectronicPropeller-Locking
Continuous Current	150A (Under Certain Heat Dissipation Conditions)	Encoder Cables	M6-4 Aviation Connector-46510mm
Standby Consumption	15mA	Output Cable	Silicone Wire-Black-7AWG-29010mm
Throttle Pos. Range	1100~1940us (Fixed)	Input Cable	Silicone Wire-Red/Black-7AWG-195015mm
Throttle Refresh Frequency	50~500Hz	Signal Cable	Shielded Cables-Black-OD4.2-5C-203015mm-JP-3P*2
Throttle Response Speed	300ms	Weight (Excl. Cable)	825g

Prop Specs

Model No.

VZ45*18 Inch (1143*457.2mm)

Weight (Single Blade)

320g

Whats Included

Packaging Box*1
VL1380*1
Parts Bag*1

Applications

VTOL compound-wing UAV platforms
Quad VTOL configurations with 140~150kg recommended MTOW (Quad)

Downloads

VL1380 KV60 Specifications (PDF)
VL1380-STEP (ZIP)
TM-Link_V2.0 Upper Computer
TM_UAVCAN_V2.3 CAN Communication (PDF)
User Manual (PDF)

Details

The T-Motor VL1380 KV60 motor pairs with a VL300A 24S ESC featuring PWM, RS485, and CAN connections for straightforward integration.

The T-Motor propeller uses a slim two-blade profile with a carbon-fiber weave finish for a clean, lightweight build.

The T-Motor brushless motor housing uses a vented, mesh-style top cover to help protect the windings while allowing airflow.

Labeled pads for GND, 5V, TX, and RX make it easier to wire the board cleanly into your build.

Detailed mounting patterns and overall dimensions for the motor, ESC, and propeller help with frame fitment and wiring planning.

The T-Motor VL1380 KV60 package includes the motor, a parts bag with mounting hardware, and the retail box for easy setup.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products

Sale

Shopping Cart

Menu

T-Motor VL1380 KV60 UAV Motor 24S for 140-150kg MTOW (Quad) VTOL, 83kg Max Thrust/Arm