MAD M8C10 EEE Drone Motor Specification

Motor Data
Motor Model	MAD M8C10 EEE V2.0	Number of pole pairs	21
Stator	Anticorrosive	Varnished wire Degree	180C
Motor Size	D:87.1 28.7 mm	Motor Balance	150C
Degree of Protection	Rain protection	Cable Length	80 mm 16# Awg(Black) silicone
Centrifugal Heat Dissipation	Independent	Rotor Balance	5 mg
Propeller Mounting Holes	D:20 M34, D:23 M44	Motor Balance	10 mg
Shaft Diameter	IN: 15 mm	Motor Mounting Holes	D:36 M44, D:48 M34
Bearing	6802ZZ*2	Disruptive test	500 V

Motor Data
Motor Model	MAD M8C10 EEE V1.0	Number of pole pairs
Stator	TAIWAN / Anticorrosive	Varnished wire Degree
Motor Size	D:87.1 28.7 mm	Magnet Degree
Degree of Protection	Rain protection	Cable Length
Centrifugal Heat Dissipation	Independent	Rotor Balance
Propeller Mounting Holes	D:20 M34, D:23 M44	Motor Balance
Shaft Diameter	IN: 15 mm	Motor Mounting Holes
Bearing	EZO 6802ZZ*2	Disruptive test
Additional Accessories	Propeller Plate 1, Locating Pin 1, M410mm 4 (Motor Screws), M314mm 4 (Propeller Screws), 3.5mm Bullet Connector 3, Heat Shrinkable Tube 3, Sticker*2

Specifications
RPM/V	90 KV
Nominal Voltage	12S lipo battery
No Load Current	0.82A / 30V
Internal resistance	122 m
Motor Weight	298 g
Product Boxed Weight	548g (150 x 150 x 65 mm)
Maximum Current	38.8 A
Maximum Power	1863W
Maximum thrust	9.8 kg
Maximum Torque	3.8 Nm
Recommended ESC	MAD AMPX 40A (5-14S) HV
Recommended Propellers	32X12, 32×9.6
UAV take-off weight	12S-32″/16kg–Quadcopter
	24kg–Hexacopter 32kg–Octocopter
Single rotor take-off weight	3kg ~ 4.5kg

Specifications

RPM/V

100 KV

Nominal Voltage

12S lipo battery

No Load Current

0.93A / 30V

Internal resistance

110 m

Motor Weight

290 g

Product Boxed Weight

551g (150 x 150 x 65 mm)

Maximum Current

45.5 A

Maximum Power

2089W

Maximum thrust

10.6 kg

Maximum Torque

4.0 Nm

Recommended ESC

MAD AMPX 60A (5-14S) HV

Recommended Propellers

28×12, 29×9.6, 30×10.0, 32×9.6

UAV take-off weight

12S-30″/16kg–Quadcopter

24kg–Hexacopter 32kg–Octocopter

Single rotor take-off weight

4kg ~ 5.5kg

Introducing the MAD M8C10 EEE Drone Motor, designed for enthusiasts and professionals alike! This motor offers an impressive KV100/KV90 rating, making it suitable for long-range drone applications. With a maximum thrust of up to 10.5kg per rotor, this motor is capable of handling a recommended maximum weight of 3.00-4.50 kgf. Note that actual performance may vary depending on factors such as battery level, propeller type, hover thrust, air pressure, and other conditions.

Add a Review

Your email address will not be published. Required fields are marked *