MAD V62 PRO VTOL Drone Motor SPECIFICATIONS

Motor Data

Motor Model	MAD V62 PRO V1.0	Number of Pole Pairs	14
Stator	Japan / Anticorrosive	Varnished Wire Degree	180C
Motor Size	D:72 x 37.5mm	Magnet Degree	150C
Degree of Protection	Rain Protection	Cable Length	80 mm (extended Enameled wires)
Centrifugal Heat Dissipation	Independent	Rotor Balance	5 mg
Propeller Mounting Holes	D:12 M3x4, D:18 M3x4, D:22 M3x4	Motor Balance	10 mg
Shaft Diameter	IN: 12 mm	Motor Mounting Holes	D:25 M3x4, D:30 M3x4
Bearing	EZ0 6801ZZ*2	Disruptive Test	500 V
Additional Accessories	M6 Propeller Plate 1, 3.5mm Bullet Connector3, Heat Shrinkable Tube3, M310mm 4 Motor Screws, M312mm 2, M318mm 2, Propeller Screws, Sticker1

Specifications

RPM/V	210KV	Nominal Voltage	12S lipo battery
No Load Current	1.8A / 20V	Internal Resistance	47m
Motor Weight	323 g	Product Boxed Weight	453g (110 x 110 x 55 mm)
Maximum Current	59.3 A	Maximum Power	2846W
Maximum Thrust	11.6 kg	Maximum Torque	3.13Nm
Recommended ESC	MAD AMPX 80A (5-14S)	Recommended Propellers	22.1×7.4
UAV Take-off Weight	125-22 / 20kg–Quadcopter, 30kg–Hexacopter, 40kg–Octocopter	Single Rotor Take-off Weight	3.5kg ~ 6.0kg

MAD V62 PRO VTOL Drone Motor Description

MAD V62 VTOL drone motor designed to carry payloads of 4-5kg per rotor, with 18-22 carbon propeller. Max thrust is up to 11.5kg per rotor, unit motor only weighs 270g.

Built for 15-20kg MTOW professional industrial VTOL fixed-wing UAS, with large pitch VOTL CF propellers, achieving large load, high efficiency and superb reliability, providing reliable power support for various endurance flight of professional aerial photography and industry applications, i.e.: surveying, mapping exploration, security inspection, etc.

Motor Test Benchmarks

Product Packaging

Company Profile

FAQ

Certifications

Add a Review

Your email address will not be published. Required fields are marked *