Overview

The iFlight XING NANO 0803 Brushless Motor is engineered for high-speed 1S micro drones like 65mm75mm whoops and lightweight toothpick builds. Available in both 22000KV and 17000KV options, this motor offers ultra-responsive power in a compact 2.1g package. It features a 9N12P stator design, precision NSK bearings, and curved N52H magnets for smooth, efficient operation. With a peak current of up to 5.81A and a maximum power output of 23.2W, the XING NANO 0803 delivers strong thrust and crisp throttle response.

Specifications

Parameter	Value
Model	XING NANO 0803
KV Rating	17000KV / 22000KV
Input Voltage	1S (4.0V)
Weight (incl. wire)	2.1g
Dimensions	10.88.9mm / 10.99mm
Shaft Diameter	1.0mm
Shaft Protruding Length	5.5mm
Mounting Holes	6.66.6mm 1.4mm
Interphase Resistance	58m
Peak Current	5.81A (22000KV) / 4.11A (17000KV)
Max Power	23.2W (22000KV) / 16.4W (17000KV)
Rotor Design	Segmented Bell
Magnet Type	N52H Curved Magnets
Configuration	9N12P
Bearing Type	NSK
Winding Type	Single strand copper winding
Lead	30mm / 30AWG / SH1.25 Plug

Performance Data (22000KV @ 4.0V)

Prop (inch)	Throttle	Load Current (A)	Thrust (g)	Power (W)	Efficiency (g/W)	Temp (C)
GF 40mm	50%	2.71	23.0	10.8	2.122	55C
	100%	5.81	46.6	23.2	2.005	55C
GF 1220	50%	2.44	14.8	9.4	1.265	42C
	100%	4.91	31.7	19.6	1.617	42C

Key Features

Available in 17000KV and 22000KV to match different flight styles.
NSK bearings and N52H curved magnets ensure durability and smooth RPM performance.
Designed for 1S builds, ideal for lightweight freestyle whoops and toothpick drones.
Compact and lightweight at only 2.1g including wires.
Optimized for GF 40mm and GF 1220 propellers.

Package Includes

1 iFlight XING NANO 0803 Brushless Motor (w/ plug)
1 M1.43mm Motor Screw Pack

Test Data

XING 0803 22000KV motor specs: 2.1g weight, 10.8*14.4mm dimension, 58m interphase resistance. Input volts: 4.0V, peak current: 5.81A, max watt: 23.2W. Rotor specs include segmented bell, shaft diameter: 1.0mm, and bearing type NSK.

Add a Review

Your email address will not be published. Required fields are marked *