MAD VAX 5320 Short Shaft V3.0 eVTOL Drone Motor 235KV/360KV/400KV, 12S, Thrust Bearing

Overview

MAD VAX 5320 (Short Shaft) V3.0 eVTOL drone motor with thrust bearing, designed for EVTOL, AIRCRAFT, and XCLASS platforms. It is specified to carry 810 kg and supports 12S voltage. This version is improved for higher reliability and stability for long range flight, while enhancing motor safety and service life.

Key Features

• KV options: 235KV / 360KV / 400KV
• 12S LiPo nominal voltage (variant specifications)
• Rain protection (degree of protection)
• Independent centrifugal heat dissipation
• Rotor balance: 5 mg; Motor balance: 10 mg
• Disruptive test: 500 V

Specifications

Motor Data (Common)

Mechanical Drawing (Selected Dimensions/Patterns)

• Mounting patterns shown: 31-M34; 20-M34; 44-M44; 30-M44
• Outer diameter shown: 63
• Length shown: 57.6
• Threaded shaft drawing shows: total length 49.8; section length 27; thread labels M4 and M8; head diameter 28
• Additional shown features include: 4-3.2; 20; 12-3.22; thickness 2.3; and other adapter plate dimensions as illustrated

235KV (Energy Efficient)

• Recommended hover thrust: 2.53.0 kgf
• Maximum thrust: 9.3 kgf
• Optimized weight: 484 g
• Efficiency: >79%

• Test reference notes: measured with input voltage of 48 V at 25C and sea level; rotational speed adjusted by throttle.
• Current guidance note: over 64A non-working zone; 1764A short-term (about 1030s) working zone; below 17A sustainable working zone.

360KV (Energy Efficient)

• Recommended hover thrust: 2.53.5 kgf
• Maximum thrust: 7.9 kgf
• Optimized weight: 478 g
• Efficiency: >77%

• Test reference notes: measured with input voltage of 48 V at 25C and sea level; rotational speed adjusted by throttle.
• Current guidance note: over 88A non-working zone; 2688A short-term (about 1030s) working zone; below 26A sustainable working zone.

400KV (Energy Efficient)

• Recommended hover thrust: 2.53.5 kgf
• Maximum thrust: 9 kgf
• Optimized weight: 472 g
• Efficiency: >75%

• Test reference notes: measured with input voltage of 48 V at 25C and sea level; rotational speed adjusted by throttle.
• Current guidance note: over 97A non-working zone; 2997A short-term (about 1030s) working zone; below 29A sustainable working zone.

Whats Included

• Motor 1
• Propeller adapter 1
• Propeller plate 1
• Rotor propeller adapter 1
• 4.0mm bullet connector 3
• Heat shrink tube 3
• M412mm motor screws 4
• M38mm prop adapter screws 4
• M318mm propeller screws 4
• M8 nut 1
• Sticker 2

For build compatibility questions (ESC/propeller matching, mounting patterns, or 12S setup), contact [email protected] or visit https://rcdrone.top/.

Details

MAD VAX 5320 Short Shaft V3.0 motor drawings list key dimensions such as 57.6 mm length, 63 body, and M3/M4 mounting hole patterns for fit checks.

The MAD VAX 5320 Short Shaft V3.0 motor package includes prop adapter parts, mounting screws, 4.0mm bullet connectors, and heat-shrink tubing for wiring.

The MAD VAX5320 short-shaft eVTOL drone motor spec sheet provides thrust curve data and detailed test tables for 23S setups.

MAD VAX 5320 Short Shaft V3.0 eVTOL drone motor is rated at 360KV with a listed thrust range of 2535 kg and a 478 g motor weight.

The MAD VAX5320 short shaft V3.0 eVTOL motor is labeled 400KV for 12S setups, with a listed weight of 472g and efficiency noted above 75%.