MAD CINE CM5320 V1.0 Cine FPV Motor 235KV/360KV/400KV, IP45, 10mm Shaft, 750mm Cable

Overview

The MAD CINE CM5320 V1.0 Cine FPV motor is offered in 235KV, 360KV, and 400KV options for multi-rotor cinematic lift platforms. It features an anticorrosive stator, IP45 protection, a 750 mm silicone cable, and balanced rotor/motor tolerances for stable operation.

Key Features

• Motor model: MAD CINE CM5320 V1.0
• Anticorrosive stator
• Varnished wire degree: 180C
• Magnet degree: 150C
• Degree of protection: IP45
• Centrifugal heat dissipation: YES
• Rotor balance: 5 mg
• Motor balance: 10 mg
• Bearing: EZO 6800*4
• Disruptive test: 500 V

For wiring, prop/ESC matching, and build compatibility questions, contact [email protected] or visit https://rcdrone.top/.

Specifications

KV Options (Performance Summary)

235KV

• Label: CINE CM5320 ENERGY EFFICIENT 235KV
• Recommended hover thrust: 2.5~3.5 kgf
• Maximum thrust: 9.3 kgf
• Optimized weight: 523 g
• Efficiency: >78%
• Test note text: The data was measured with an input voltage of 48 V, at a temperature of 25C and sea level. The rotational speed was adjusted by the throttle.

360KV

• Label: CINE CM5320 ENERGY EFFICIENT 360KV
• Recommended hover thrust: 2.5~3.5 kgf
• Maximum thrust: 7.9 kgf
• Optimized weight: 523 g
• Efficiency: >78%
• Test note text: The data was measured with an input voltage of 48 V, at a temperature of 25C and sea level. The rotational speed was adjusted by the throttle.

400KV

• Label: CINE CM5320 ENERGY EFFICIENT 400KV
• Recommended hover thrust: 2.5~3.5 kgf
• Maximum thrust: 9.0 kgf
• Optimized weight: 525 g
• Efficiency: >75%
• Test note text: The data was measured with an input voltage of 48 V, at a temperature of 25C and sea level. The rotational speed was adjusted by the throttle.

Whats Included

• Prop Adapter *2
• Propeller Plate *2
• 4.0mm Bullet Connector*3
• Heat Shrinkable Tube*3
• M4*12mm *4 Motor Screws
• M3*8mm *4 Prop Adapter Fixing Screws
• M3*18mm *2 Propeller Screws
• M8 Nut*1
• Sticker*1

Details

MAD CINE CM5320 V1.0 cine FPV motor uses a 63 mm can with multiple mounting patterns (20 M3, 30/44 M4) and 75 mm leads for straightforward installation.

Performance curves and thrust/current data for the MAD CINE CM5320 motor help with prop and battery selection during cine FPV builds.

The MAD CINE CM5320 360KV cine FPV motor includes performance curves and test tables to help guide prop and setup choices.

MAD CINE CM5320 V1.0 Cine FPV motor specs list a 400KV rating, 525 g weight, and a 125C max temperature alongside performance curves and test data.