iFlight GM5208-12 Encoder Combo Set for Brushless 3-Axis Gimbal Stabilizer (AS5048A, Alexmos 32BIT)

Overview

The iFlight GM5208-12 Encoder Combo Set adds encoders to each brushless gimbal motor so the gimbal control system can track motor position more accurately for improved stabilization and better power efficiency. In a 3-axis stabilization gimbal, passive inertial stabilization requires careful camera balance on the pan/tilt/roll axes, while active stabilization uses sensors to measure motion and counteract it using motors on each axisencoders support this active control by improving position feedback.

Key Features

• Easier gimbal tuning with reduced calibration work.
• Power saving; stated up to 5 times longer working time than gimbals without an encoder system.
• Twin IMUs.
• Faster response; stated instant torque increase and improved behavior at difficult rotation angles.
• Encoder chip: AS5048A.

For compatibility questions (gimbal controller, wiring, and setup), contact https://rcdrone.top/ or [email protected].

Specifications

What’s Included

• 3 x GM5208-12 gimbal motor with AS5048A encoder & magnet
• 1 x Alexmos 32BIT BGC board (encoder version, without aluminum case)
• 1 x connecting cables set

Applications

• 3-axis brushless camera gimbal stabilization systems requiring encoder feedback
• Gimbal upgrades where improved position tracking and tuning efficiency are required