Hobbywing XeRun DRX 3662 SD 6500KV Sensored Brushless Motor for 1/10 RC Drag Racing (2S LIPO)

Overview

The Hobbywing XeRun DRX 3662 SD 6500KV is a sensored brushless motor for 1/10th scale RC drag racing applications. It is designed for ultra-high RPM operation and strong power output, with an open-structure motor case and end cover to support heat dissipation.

Key Features

• Ultra-high RPM design for drag racing
• Big-opening motor case and end cover structure for improved heat dissipation
• Dual sensor interface design for flexible wiring/layout requirements
• Widened and thickened copper bar design for large current applications
• Steel-sleeved rotor design intended for ultra-high RPM running conditions

For product selection and setup support, contact [email protected] or visit https://rcdrone.top/.

Specifications

Applications

• 1/10th RC drag racing vehicles

Important Notes

• Never leave this product unsupervised when it is powered on.
• Ensure all wires and connections are well insulated before connecting the motor to related devices, as short circuit will damage your motor.
• Please strictly follow the A-A, B-B and C-C wiring order when connecting an ESC to the motor.
• Never allow this product to come in contact with water, oil, fuel or other electroconductive liquids. If this happens, stop the use of your product immediately and let it dry carefully.
• Read through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.
• Never hit full throttle before installing the pinion, as high-speed rotation may cause damage to the motor in circumstances of no load.
• Ensure all devices are well connected, in order to prevent poor connection that may cause your vehicle to lose control or other unpredictable issues such as damage to the device.
• Stop using the motor when its shell temperature exceeds 100212F; otherwise, the rotor may be demagnetized and cause irreversible damage to your motor.