BrotherHobby Avenger 5215 V5 Motor (CW) 245KV/335KV/415KV for 8-12S, Folding Prop Connector

Overview

BrotherHobby Avenger 5215 V5 Motor (CW) is a brushless motor series available in 245KV / 335KV / 415KV options. It is specified for 812S LiPo operation (depending on setup) and uses a folding propeller connector system for convenient installation and carrying.

Key Features

• Folding paddle/propeller mounting system
• Base casing and bell cap: Al 7075
• Shaft material: SUS420 (heat treated steel shaft referenced in feature diagram)
• Rotor magnets: N52H arc magnets
• Configuration: 12N14P
• Wire: 16# with 90cm length
• Premium high precision bearings (bearing size listed in specs)

Specifications

Version-specific electrical data (from test reports)

General specs (page listing)

Test snapshot at 100% throttle (from performance card)

• 245KV (Folding 15558 Triblade): Voltage 50.4V; Max Current 56.8A; RPM 9230 RPM; Max power 2862.7W; Efficiency 2.93; Max Thrust 8387g; 101C after 100% throttle running 2min (Ambient temp. 26C).
• 335KV (Folding 1865 Triblade): Voltage 33.6V; Max Current 75.7A; RPM 7981 RPM; Max power 2543.5W; Efficiency 3.5; Max Thrust 8902g; 97C after 100% throttle running 2min (Ambient temp. 26C).
• 415KV (Folding 1660 Triblade): Voltage 33.6V; Max Current 76.9A; RPM 10185 RPM; Max power 2583.8W; Efficiency 3.34; Max Thrust 8630g; 85C after 100% throttle running 2min (Ambient temp. 26C).

Note from reports: temperature refers to motor inside copper wire temperature running 2MIN at 100% throttle; bench data for reference only.

Whats Included

Package content depends on the selected folding propeller kit:

• Three-blade folding propeller packing list: motor; folding propeller; propeller connector; screw; spacer; flange nut; external thread cylindrical groove; spring
• Two-blade folding propeller packing list: motor; folding propeller; propeller connector; screw; spacer; flange nut; external thread cylindrical groove

For help confirming the correct package (two-blade vs three-blade, and CW vs CCW), contact customer service at support@ or https:///.

Applications

• Multirotor UAV platforms using folding propellers
• Heavy-lift builds where higher thrust per motor is required (test cards show up to 8.9kg maximum pull force for a single motor depending on setup)

Details

BrotherHobby Avenger 5215 V5 motors pair with foldable propellers and list KV options of 245/335/415, with a stated single-motor thrust up to 8.9 kg.

Avenger V5 5215 motor test results list max thrust, voltage, RPM, current, power, efficiency, and temperature for 245KV, 335KV, and 415KV setups.

The BrotherHobby Avenger 5215 V5 motor is offered in 245KV, 335KV, and 415KV options to suit different prop and build setups.

The BrotherHobby Avenger 5215 V5 motor uses a SUS420 steel shaft, 7075 aluminum caps, N52 arc magnets, and high-precision bearings.

Avenger 5215 V5 motor drawings list key dimensions, bolt patterns (8-M4 and 6-M3), and folding prop rotation diameters from 391.7 to 465.9 mm for setup checks.

The Avenger 5215 V5 motor setup uses a flange nut, spacers, and a propeller connector to mount a folding triblade prop securely.

The BrotherHobby Avenger V5 motor is paired with CW and CCW folding triblade propeller sets and basic mounting hardware for quick installation.

The folding propeller package includes the motor plus propeller blades, connector hardware, screws, spacers, a flange nut, and a spring.

The Avenger 5215 V5 245KV motor sheet includes 12N14P dimensions and a 50.4V load test with a Folding 15558 triblade propeller.

BrotherHobby Avenger 5215 V5 includes a 335KV spec, detailed dimensions, and thrust/efficiency test data with a Folding 1865 triblade prop.

Details

BrotherHobby Avenger 5215 V5 motors list KV options (245/335/415) and note up to 8.9kg single-motor thrust with a 345g design.

Avenger 5215 V5 motor test data compares 245KV, 335KV, and 415KV variants with thrust, RPM, current, and temperature results at full throttle.

The BrotherHobby Avenger 5215 V5 motor is offered in 245KV, 335KV, and 415KV versions for matching your prop and power setup.

The Avenger 5215 V5 motor uses a SUS420 steel shaft, 7075 aluminum caps, N52H arc magnets, and high-precision bearings in its build.

BrotherHobby Avenger 5215 V5 motor drawings list key dimensions and mounting patterns (6M3 and 8M4) plus folding prop rotation diameters for 1555, 1660, and 1865 triblades.

A step-by-step folding tri-blade propeller installation diagram shows the flange nut, spacers, and propeller connector order on the motor shaft.

The Avenger V5 motor pairs with forward (CW) and reverse (CCW) folding triblade blades, along with the included screws, washers, and hub parts for assembly.

The packing list outlines the included motor, folding propeller, propeller connector, screws, spacers, a flange nut, and related hardware for two-blade or three-blade setups.

The BrotherHobby Avenger 5215 V5 245KV motor includes dimension drawings and a performance table tested with a folding 1555 triblade prop.

BrotherHobby Avenger 5215 V5 motor documentation includes 335KV specifications, dimensional drawings, and thrust/power test data using an 1865 triblade prop.

The Avenger 5215 V5 415KV motor sheet lists key dimensions and wiring specs along with 33.6V thrust and efficiency test data for a folding 1660 triblade prop.