T-Motor U7 V2.0 KV490 Waterproof Power Type UAV Motor (490rpm/V) Industrial Grade Dustproof

Overview

T-Motor U7 V2.0 KV490 Power Type UAV Motor is a waterproof, dustproof UAV motor for multi-copter power systems. It is designed for lifting DSLR cameras and building professional photography multirotors; U7 V2.0 motors are stated to lift a quadcopter up to 7 kg. Product positioning also references AUW 1024 kg multi-copter platforms.

Key Features

• Water-resistant & dust-resistant design
• Unique side hole design for swift airflow; stated to cool 2.5 times faster than others
• Six holes beveling upward for waterproof and sand-resistant features
• Abnormal shaft design: special screw for stator/rotor installation to avoid circlip looseness
• High-quality varnished wire: imported oxygen-free copper coil, temperature tolerance 180C, enhanced short circuit resistance
• High-standard silicon steel sheet precision winding; advanced 0.2 mm silicon steel sheet to reduce heat and eddy loss and improve efficiency
• Larger precision bearing for lower noise; imported German bearing with stated service life over 1600 hours under trouble-free operation
• Industrial grade positioning

For selection and compatibility support (props, ESC pairing, and multi-copter configuration), contact [email protected] or visit https://rcdrone.top/.

Specifications

Whats Included

• 1x T-MOTOR U7 V2.0 Motor
• 1x Hardware pack

Applications

• Aerial photography
• Filming
• Delivery service
• Agriculture applications

Details

T-Motor brushless outrunner motor design features a compact housing and exposed copper windings for efficient drone builds.

The U-Power U7 waterproof power type is labeled for 1024 kg AUW multicopters and features dustproof and waterproof protection.

The T-Motor U7 motor uses a side-hole housing design to promote airflow around the can for improved cooling.

The abnormal shaft design uses a special screw for stator and rotor installation to help prevent circlip looseness.

T-Motor stator design uses high-quality varnished wire and a larger bearing for smooth operation with lower noise.

The motor uses precision winding and a 0.2 mm silicon steel sheet core to help reduce heat and eddy current losses.

T-Motor propellers can be installed using either a traditional mount or the CF props setup with the included screws and adapter.

T-Motor Carbon Prop 17×5.8R includes a recommendation chart listing compatible U7 motor KV options and suggested prop sizes like CF16*5.4, CF18*6.1, and CF20*6.