Overview

The T-Motor Cine30 6S is an FPV drone motor designed for 3” cinewhoop drone builds. It features an integrated protective design to help prevent sand, gravel, and dust from entering the motor during filming and take off/landing operations, and the iron core uses an electrophoretic coating treatment with 72-hour salt spray test certification.

Key Features

Comprehensive protection design for secure flight: corrosion resistant, sand resistant, dust resistant, all-environment reliability
Optimized electromagnetic design and heat dissipation for improved initial response and sustained power
Multi-frame compatible base design with non-protruding shaft screw configuration
Waterproof and dustproof class: IP45

For product support and order assistance, contact support@ or visit https:///.

Specifications

Type	Cine30
Motor dimension	24.69*19.9mm
Magnet	Nickel plated arc magnet
Waterproof and dustproof class	IP45
Dynamic balance requirements standards	5mg
Coil insulation test	200V withstand voltage test
Configuration	12N14P
Bearings	Imported 683ZZ
Shaft diameter	1.5mm
Lead	24AWG*150mm
Screw diameter	12-M2-4
Prop adapter shaft thread	5-M2-4
Packing size	656555mm
Packing weight	30g(1pcs)/125g(4pcs)
Recommended voltage	6S
Rated voltage (Lipo)	22.2V
Idle current (10V)	1.1A
Internal resistance	120m
Peak current (1s)	25A
Max power (1s)	323W
Max thrust	715g
Weight (incl. cable)	18g

Recommended Setup (as shown)

Motor	Cine30 6S
Frame type	Cinewhoop X4
Prop	GF D76-3
ESC	F7 45A AIO 6S
Lipo cells	6S
Recommended takeoff weight range	Within 700g
Max takeoff weight	1000g

Test Data Notes (as shown)

1350mah 6s battery (216g), load weight 120g, AUW 570g, flight time 10 minutes.
1350mah 6s battery (216g), without payload, AUW 450g, flight time 13 minutes.
3000mah 6s battery (330g), without payload, AUW 564g, flight time 20 minutes.

Note: Recommend BL32 ESC settings: Startup power: 40%, Timing: 30, PWM frequency: 32K, for best efficiency and flight time experience (improper settings may cause desync).

Test Data Table: Cine30 6S + T-HOBBY T76S-3

Operating temperature: 136C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.04	10%	0.15	6157	14	4	3.93	0.00
24.04	20%	0.64	11979	57	15	3.73	0.01
24.02	30%	1.65	17422	125	40	3.16	0.01
23.99	40%	3.33	22253	210	80	2.63	0.02
23.95	50%	6.04	26198	291	145	2.01	0.03
23.91	60%	9.03	30637	404	216	1.87	0.04
23.87	70%	12.39	33807	488	296	1.65	0.05
23.81	80%	16.39	36452	577	390	1.48	0.06
23.74	90%	20.54	38673	651	488	1.33	0.07
23.68	100%	24.95	40346	702	591	1.19	0.07

Test Data Table: Cine30 6S + T-HOBBY T76S-3 (Test with Oddity frame)

Operating temperature: 128C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.02	10%	0.14	6755	16	3	4.82	0.00
24.01	20%	0.58	12809	57	14	4.08	0.01
23.99	30%	1.42	18145	115	34	3.35	0.01
23.95	40%	2.89	23041	189	69	2.73	0.02
23.90	50%	5.06	27883	284	121	2.34	0.03
23.83	60%	7.65	32180	379	182	2.08	0.04
23.74	70%	10.75	35196	455	255	1.78	0.05
23.65	80%	14.14	38520	551	334	1.65	0.06
23.55	90%	18.24	40999	633	429	1.47	0.07
23.44	100%	22.34	42816	699	524	1.34	0.07

Test Data Table: Cine30 6S + HQ DT76-3

Operating temperature: 115C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.04	10%	0.15	6350	13	4	3.64	0.00
24.04	20%	0.59	12503	52	14	3.70	0.01
24.02	30%	1.45	18020	110	35	3.17	0.01
24.00	40%	2.86	23081	188	69	2.73	0.02
23.97	50%	5.05	28074	280	121	2.31	0.03
23.93	60%	7.70	32423	380	184	2.06	0.04
23.89	70%	10.93	35838	469	261	1.80	0.05
23.84	80%	14.60	39206	565	348	1.62	0.06
23.77	90%	18.82	41937	647	447	1.45	0.07
23.70	100%	23.46	44086	722	556	1.30	0.07

Test Data Table: Cine30 6S + HQ DT76-3 (Test with Oddity frame)

Operating temperature: 111C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.02	10%	0.13	6741	13	3	4.24	0.00
24.01	20%	0.55	12925	52	13	3.95	0.01
23.99	30%	1.31	18049	105	31	3.33	0.01
23.96	40%	2.57	23138	176	62	2.86	0.02
23.91	50%	4.51	27798	264	108	2.44	0.03
23.85	60%	6.95	31995	353	166	2.13	0.04
23.78	70%	9.67	35476	434	230	1.89	0.05
23.68	80%	13.24	39149	533	313	1.70	0.06
23.57	90%	17.38	42395	626	410	1.53	0.07
23.47	100%	21.44	44626	692	503	1.38	0.07

Test Data Table: Cine30 6S + GF D75-3

Operating temperature: 104C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.04	10%	0.15	6457	11	4	3.22	0.00
24.03	20%	0.59	12529	45	14	3.15	0.01
24.01	30%	1.42	18117	94	34	2.75	0.01
24.00	40%	2.72	23377	155	65	2.38	0.02
23.97	50%	4.75	28514	230	114	2.02	0.02
23.94	60%	7.00	33261	311	168	1.86	0.03
23.90	70%	9.77	37372	387	234	1.66	0.04
23.85	80%	13.01	41439	473	310	1.53	0.05
23.80	90%	16.62	45023	554	396	1.40	0.05
23.73	100%	20.79	48138	629	493	1.27	0.06

Test Data Table: Cine30 6S + GF D75-3 (Test with Oddity frame)

Operating temperature: 96C (Ambient temperature: 25C)

Voltage (V)	Throttle (%)	Current (A)	RPM	Thrust (g)	Power (W)	Efficiency (g/W)	Torque (N*m)
24.03	10%	0.13	6847	15	3	4.71	0.00
24.01	20%	0.55	13126	53	13	4.00	0.01
24.00	30%	1.30	18595	106	31	3.40	0.01
23.96	40%	2.49	23878	173	60	2.90	0.02
23.92	50%	4.25	29216	254	102	2.50	0.03
23.87	60%	6.27	33973	335	150	2.24	0.03
23.80	70%	8.71	38196	415	207	2.00	0.04
23.72	80%	11.64	42520	508	276	1.84	0.05
23.63	90%	14.84	46173	588	351	1.67	0.06
23.54	100%	18.42	49363	655	434	1.51	0.06

Motor Analysis Chart (as shown)

Thrust-Efficiency: Cine30 6S GF D75-3; Cine30 6S GF D75-3 (Test with Oddity frame)
Thrust-Efficiency (Oddity frame comparison): Cine30 6S HQ DT76-3 (Test with Oddity frame); Cine30 6S T-HOBBY T76S-3 (Test with Oddity frame); Cine30 6S GF D75-3 (Test with Oddity frame)

Whats Included

4 x T-Motor Cine 30 6S Motor
Parts Bag*1

Applications

3” cinewhoop FPV drone builds
6S FPV setups where IP45 dust/water resistance and compact motor dimensions are required

Details

The protective motor design is built for dusty, sandy, and moisture-prone environments while keeping a compact mounting base for easy frame compatibility.

The Cine30 motor lists a 24.6919.9mm body, 1.5mm shaft, M2 mounting holes, and a 6S recommended voltage.

Recommended Cine30 6S setup details list compatible parts like the Cinewhoop X4 frame, 6S LiPo, and F7 45A AIO 6S FC/ESC, along with example flight-time test data.

Cine30 6S test data lists voltage, throttle, current, RPM, thrust, power, efficiency, torque, and operating temperature across multiple throttle levels.

Cine30 6S test data lists voltage, throttle, current, RPM, thrust, power, efficiency, torque, and operating temperature for different propellers.

Cine30 6S test data with the GF D75-3 propeller includes throttle-to-thrust figures and a thrust-efficiency curve for reference.

The package includes four motors and a parts bag of mounting screws, with a thrust-to-efficiency curve provided for reference.

Add a Review

Your email address will not be published. Required fields are marked *

Related Products

Sale

iFlight XING E PRO 2306 1700KV 2450KV 2-6S Brushless Motor 1/ 2/ 4PCS for RC Models Car Multicopter FPV DIY Racing Parts Accs

$27.24 $34.05

Axisflying AF2406 2080KV Brushless Motor for 5 Inch Freestyle FPV Drone Motor Replacement

Sale

Shopping Cart

Menu

T-Motor Cine30 6S FPV Drone Motor for 3” Cinewhoop (IP45, 12N14P, 715g Max Thrust, 4pcs)