MAD X5230 IPE V1.0 230KV Long Shaft eVTOL Airplane Drone Motor, IP35, 575 g, 12 kgf Max Thrust

Overview

MAD X5230 (Long shaft) IPE eVTOL airplane drone motor (Motor Model: MAD X5230 IPE V1.0) is a 230KV motor with 14 pole pairs, IP35 protection, and centrifugal heat dissipation.

Key Features

• KV rating: 230KV (IPE 230KV label)
• Anticorrosive stator
• Centrifugal heat dissipation: YES
• Degree of protection: IP35
• Varnished wire degree: 220C
• Motor balance: 180C; 10 mg
• Rotor balance: 5 mg

Specifications

Drawing and Mount Holes

• Body diameter: 60
• Overall length: 116.5
• Additional dimensions shown: 61.5, 55, 39.2, 27.5
• Shaft/thread markings shown: 8, M8*1
• Mounting pattern shown: 8-M4, 44, 30
• Additional plate dimensions shown: 74, 70, 4-4.2, 44, 3.5, 8.1, 85, 19
• Additional marking shown: 14

Whats Included

• Motor x1
• Propeller adapter x1
• M8 nut x1
• Prop plate x1
• Cross plate x1
• 4.0mm bullet connector x3
• Heat shrinkable tube x3
• M4*12 motor screws x3
• M4*12mm flat head machine screw x4
• M4 set screws x4
• Sticker x2

For compatibility checks (prop/ESC/battery matching) and build support, contact support@.

Performance Data (Datasheet)

• Test propeller/ESC combinations listed: FALCON 22*10 (10S), FALCON 20*10 (12S), FALCON 21*10 (12S) with AMPX 80A (5-14S)
• Datasheet notes: input voltage 48 V, temperature 25C, sea level; rotational speed adjusted by throttle
• Working zone note: over 83A is non-working zone; 30-83A shorter term (about 10-30s) working zone; below 30A sustainable working zone
• Recorded maximum temperatures shown: 72C (10S), 87C (12S 20*10), 106C (12S 21*10)

The MAD X5230 long-shaft motor uses an M81 shaft and an 8M4 mounting pattern, with detailed dimensions for accurate installation.

MAD X5230 IPE V1.0 motor package includes a propeller adapter, mounting plates, bullet connectors, heat-shrink tube, hardware, and stickers for installation.

Details

The MAD X5230 long-shaft motor drawing provides key overall dimensions and the mounting-hole layout for accurate installation.

The MAD X5230 motor package includes a propeller adapter, cross plate mount, M8 nut, prop plate, bullet connectors, screws, heat-shrink tubing, and stickers for installation.

The MAD X5230 IPE 230KV long-shaft motor includes key operating data and specs such as 575 g weight and up to 12 kgf maximum thrust.