Yahboom Programmable Building Block Servo/Motor B01/B02 270/360 + Red Continuous Motor for Robotics

Overview

This Yahboom programmable building block servo/motor series includes a gray building block servo (B01 / B02) for angle control and a red building block motor for continuous rotation projects. The gray servo is used for angular control builds such as robotic arms and towers. The red motor is suitable for continuous rotation applications such as car wheels and Ferris wheel drive.

With a compatible controller board and building blocks, the servo and motor can be controlled to build different mechanisms and complete various DIY builds.

Key Features

• Extreme gear overload protection: protected by a gear spring in the case of excessive torque and random torque.
• Servo vs motor selection:
  • Red building block motor: controls rotation speed and direction of the output shaft and can rotate continuously; adopts XH 2.54 interface.
  • Gray building block servo: controls rotation angle of the output shaft; adopts DuPont line interface.
• Single-axis / dual-axis servo:
  • B01: single axis (with white cross shaft); suitable for locked-angle projects such as robotic arms and hanging towers.
  • B02: double axis with dual output shafts; can connect two cross shafts at the same time; rotation angle 0~360; suitable for dual-output shaft angle rotation projects such as dump trucks and forklifts.
• Interface details:
  • Servo uses a commonly used DuPont line interface for project expansion.
  • Motor uses XH 2.54 interface with anti-reverse connection capability.
• Materials and fit: environmentally friendly POM plastic; cross output shaft compatible with standard building-block cross holes.

Specifications

Electrical & performance (from product parameter table)

Mechanical drawing notes (dimension marks shown on drawings)

• B01 / Red motor drawing (mm): 40.00, 32.00, 24.00, 16.00, 12.00, 9.60, 8.00, 6.50, 5.60, 4.80, 1.60; hole diameter mark: 4.80.
• B02 drawing (mm): 40.00, 24.00; spacing marks: 4.00, 8.00; height mark: 12.00; additional marks shown: 11.60, 11.9, 4.80, 4.18, 0.80, 2.85, 6.20.

Note: The gray cross shaft shown with the B02 is not equipped as standard from the factory and is only used for function display.

For compatibility questions or help choosing between B01/B02 servo and the red motor, contact https://rcdrone.top/ or email [email protected].

Applications

• Locked-angle mechanisms: robotic arms, hanging towers, steering linkages
• Continuous rotation mechanisms: car wheels, small cars, Ferris wheel drive
• Dual-output angle rotation builds (B02): dump trucks, forklifts
• DIY building-block projects such as Spin:bit, Pirate Ship, smart robot car building block, DIY robot car

Documents

• Yahboom Gray servo
• Yahboom Red motor

Details